Mica Heater Bands

Manufactured from TOP QUALITY Mica Insulation and Materials. Many sizes and constructions in stock, or we can build a band to your specifications!

Click Here  for Technical Information About Mica Heater Bands

Contact Us for a Quote

Construction Notes:

● All construction types shown are stocked with 12" (length) leads, unless otherwise noted.
● Standard Barrel Nuts (3/8" high) are normally supplied on bands 1 1/2" I.D. or larger.
● We supply a Low Profile Barrel Nut Strap (7/32" high) on bands under 1 1/2" I.D.


When ordering, please specify the following information:

● Quantity and Part Number (if known)
● Inside Diameter (I.D.)
● Width (W)
● Voltage (2-pc. construction; specify total voltage)
● Wattage (2-pc. construction; specify total wattage)
● Basic Construction Type (A-Z)
● Lead Lengths Desired (stock length 12") or Post Terminals (10-24 thread size)
● Any Special Options Required


For More Information Click Here

Heater Band Configurations:

Type A Barrel Nut Strap

Metal (stainless steel armor) braid leads exit from both sides of gap.


htr-a

Type B Barrel Nut Strap

Non-metal (fiberglass insulated) braid leads exit from both sides of gap.


htr-b

Type C Barrel Nut Strap

Leads exit from one side of gap through outside surface of heater. Options: 1, 2, 3


htr-c

Type D Barrel Nut Strap

Leads exit from edge on opposite side from gap. Options: 2, 3


htr-d

Type E Barrel Nut Strap

Leads exit from each side of gap through inside. Options: 3


htr-e

Type F Flange Lock-up

Leads exit from both sides of gap through edge. Options: 2, 3


htr-f

Type G Barrel Nut Strap

Metal braid leads exit from edge on one side of gap.


htr-g

Type H Barrel Nut Strap

1 pc.; One post terminal on each side of gap.


htr-h

Type I Barrel Nut Strap

2 pc.; Post terminals at each end of heater.


htr-i

Type J Barrel Nut Strap

1 pc.; Two post terminals on one side of gap.


htr-j

Type K Barrel Nut Strap

2 pc.; Two post terminals on each side of gap.


htr-k

Type L Barrel Nut Strap

Expandable. Options: 1, 2, 3, 16


htr-l

Type M Barrel Nut Strap

Cushioned clamping strap partially covers heater. Options: 1, 2, 3, 16


htr-m

Type N Flange Lock-up

1 pc.; Leads exit from one side of gap through outside surface of heater. Options: 1, 2, 3


htr-n

Type O Flange Lock-up

2 pc.; Leads exit from both sides of gap through outside surface of heater. Options: 1, 2, 3


htr-o

Type P Tapered Wedge Lock

Leads exit from both sides of gap through edge. Options: 2, 3


htr-p

Type Q Flange Lock-up

Hinged; Post terminals at each end of heater.


htr-q

Type R Flange Lock-up

Hinged; Two post terminals on each side of gap.


htr-r

Type S Flange Lock-up

Hinged; Leads exit from both sides of gap through outside surface of heater.


htr-s

Type T Flange Lock-up

1 pc.; One post terminal on each side of gap.


htr-t

Type U Flange Lock-up

2 pc.; Post terminals at each end of heater.


htr-u

Type V Flange Lock-up

1 pc.; Two post terminals on one side of gap.


htr-v

Type W Flange Lock-up

2 pc.; Two post terminals on each side of gap.


htr-w

Type X Extended Flange with Electrical Connections

1 pc.; Options: 1, 2, 3, 16


htr-x

Type Y Extended Flange with Electrical Connections

2 pc.; Options: 1, 2, 3, 16


htr-y

Type Z Hexagonal Band Heater

Leads exit from both sides of gap through edges.


htr-x

Optional Features:

1. Flexible armor (BX) installed over flexible leads.
2. Metal braid installed over flexible leads.
3. Flexible leads (asbestos and fiberglass insulated nickel or nickel-clad conductor) installed with 2" fiberglass boot.
4. Low profile band, presized for slip fit by installation of punch lock straps.
5. Terminal box.
6. Flexible armor in right angle bracket.
7. Thermocouple hole.
8. Button terminals.
9. Flexible armor (BX) installed over flexible leads.
10. Metal braid installed over flexible leads.
11. Flexible leads (asbestos and fiberglass insulated nickel or nickel-clad conductor) installed with 2" fiberglass boot.
12. Low profile band, presized for slip fit by installation of punch lock straps.
13. Terminal box.
14. Flexible armor in right angle bracket.
15. Thermocouple hole.
16. Button terminals.


Standard Mica Heater Bands

● Many sizes and constructions in stock, or we can build a band to your specifications.
● All construction types are stocked with 12" (length) leads, unless otherwise specified.
● Standard barrel nuts (3/8" high) are normally supplied on bands 1½" I.D. or larger.
● We supply a low profile barrel nut strap (7/32" high) on bands under 1½" I.D.
● 1-year limited warranty. Made in the U.S.A.

For More Info

Economical Mica Heater Bands

Economical Mica Heater Bands are designed primarily for nozzle and narrow width sizes. The primary design difference between the economical and the standard mica bands is the thinness of the economical bands. This reduction in thickness not only contributes to the more economical pricing, but actually makes for a better heater (in the smaller sizes) by conforming more readily to the component being heated. Economical Mica Heater Bands are available with all of the standard options and designs available on our Standard line of bands, and carry the same 1-year limited warranty.

For More Info

Adjustable Mica Heater Bands

● A good substitute for hard-to-find metric sizes.
● Easy on/off -- other bands do not need to be removed for installation.
● Dual voltage options for wiring flexibility.
● Special barrel nut strap adjusts to fit a wider variety of I.D. sizes.

For More Info